Poured concrete patios built to handle coastal salt air and clay soil
Concrete Patio Installation in La Jolla, California
We handle concrete patio installation in La Jolla, California for homeowners who want a flat, drain-correct slab that lasts through marine-layer winters and dry summers. As a local patio installation contractor, we pour everything from small Windansea courtyards to 600-square-foot La Jolla Shores entertaining slabs. Most estimates go out same-day, and most patios are walkable in 48 to 72 hours.
Live phone supportUpfront optionsBacked workmanship
What's included
What Our Concrete Patio Installation Includes
Every patio we pour includes the full sequence from layout to final seal. Here is what is covered in the standard price, and what we quote separately if your yard needs it.
Layout and Site Prep
We stake the patio footprint, confirm the slope, mark utilities, and excavate to the correct depth. Spoils go into a dumpster we bring, not onto your neighbor's property. This step sets the grade that everything else depends on.
Compacted Base and Formwork
We place and compact 4 inches of aggregate base, then set formwork to the finished slope. Base prep is the single biggest factor in whether a patio settles later. We do not skip it, and we do not thin it out to save a load of gravel.
Rebar and Expansion Joints
We tie #4 rebar on 18-inch centers on chairs, and we install expansion joint material against the house, pool coping, and any fixed structure. That lets the slab move without cracking the stucco or the pool tile.
Pour, Finish, and Control Joints
We place the concrete in one continuous lift, vibrate it, screed it, and finish it with the texture you chose. Control joints get cut at 24 hours at 2 to 3 times the slab thickness in feet. That is what keeps shrinkage cracks where they belong.
Cure, Seal, and Walkthrough
We cover the slab for 3 to 7 days, apply a penetrating sealer once it is dry, and walk the finished patio with you. You get care instructions and a written workmanship warranty. If something is wrong, you know how to reach us.
Service overview
Concrete Patio Installation in La Jolla, California
Concrete patio installation in La Jolla, California is the process of forming, reinforcing, pouring, and finishing an exterior slab that gives you a stable outdoor floor for dining, lounging, or a hot tub. It starts with excavation and compacted base, then rebar or wire mesh set on chairs, then a 4-inch minimum pour of concrete mix finished with a bull float, edger, and groover. We cut control joints within 24 hours to steer cracking, then seal the surface once it cures.
Most La Jolla homeowners call us because an old patio has cracked, settled, or turned into a puddle every time it rains. Coastal properties from Bird Rock to Mount Soledad sit on expansive clay and sandstone that moves with moisture, and salt air eats cheap finishes fast. If you have been searching for a concrete patio installation near me in La Jolla, we pour slabs engineered for that exact ground and that exact air.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How Our Patio Installation Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Site Visit and Layout
We walk the yard with you, check the slope, mark utilities, and confirm the patio footprint with stakes and string. You get a written scope and a fixed price the same day in most cases. If a permit is required, we tell you before you sign anything.
Demo and Excavation
We remove old concrete, pavers, or sod, then excavate to 6 to 8 inches below finish grade. A wheelbarrow and mini-skid move the spoils to a dumpster, not your neighbor's curb. Most residential patios take one day for demo and one day for excavation.
Base, Formwork, and Rebar
We compact 4 inches of aggregate base, set 2x6 or 2x8 formwork to the correct slope, and tie #4 rebar on 18-inch centers on chairs. Expansion joint material goes against the house and any pool coping so the slab can move independently.
Pour and Finish
A concrete mixer truck arrives on schedule, and we place the pour in one continuous lift. A vibrator removes air pockets, a screed strikes the surface, and a bull float opens the cream. We finish with an edger and groover, then hand-trowel or broom depending on the texture you picked.
Cure, Cut, and Seal
We cover the slab for 3 to 7 days to slow the cure, then run a concrete saw to cut control joints at 24 hours. Final step is a penetrating sealer once the concrete is dry. You get a walkthrough, care instructions, and a workmanship warranty.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Concrete mixer truck
Delivers ready-mix concrete in the volume and slump we specify. For small patios, we use a portable concrete mixer on site. Either way, the mix design is the same.
Bull float and power trowel
The bull float opens the cream and levels the surface after screeding. The power trowel gives a hard, dense finish on smooth patios. We hand-trowel edges and tight corners.
Concrete saw
Cuts control joints at 24 hours, once the concrete is hard enough to cut without raveling. Joint depth is one-quarter of the slab thickness, which is what lets the crack form inside the joint.
Rebar cutter and bender
Cuts and shapes #4 rebar to the layout. We tie rebar on chairs so it sits in the middle of the slab, not on the ground where it does nothing.
Vibrator
Removes air pockets from the pour, especially around rebar and at the edges of formwork. Air pockets are where cracks start.
Edger and groover
The edger rounds the slab edge so it does not chip. The groover cuts the tooled joint that guides the concrete saw and gives a clean line.
Wheelbarrow and screed
Moves concrete to spots the truck chute cannot reach, and strikes the surface to the form height. Essential on tight La Jolla side yards where the truck cannot back in.
Use cases
When to Install a Concrete Patio
These examples show how the service framework adapts rather than forcing every call through one repair.
La Jolla Shores Pool Deck Patio
A 500-square-foot pool deck had exposed aggregate that was spalling and slippery when wet. The slab had settled 1.5 inches on one side, and the pool coping was separating from the deck. → We replaced the deck with a new 4-inch slab, installed expansion joint material against the coping, and finished with a light broom texture for grip. The new deck is flat within 1/8 inch across 20 feet and drains to a channel drain.
Mount Soledad Hillside Terrace
A steep Mount Soledad backyard had no usable flat space. The homeowner wanted a patio but the slope was 30 degrees, and the soil was clay over sandstone. Water ran down the hill and pooled at the house foundation. → We poured a 4-foot retaining wall with drainage behind it, backfilled and compacted, then poured a 400-square-foot patio on top. The patio is flat, the wall handles the slope, and a swale directs water around the house.
Problems we solve
Problems Our Patio Installation Solves
Most of the patios we replace in La Jolla failed for one of four reasons. Here is what we see, what it costs you if you wait, and how we fix it.
Cracked or spalling patio slab
We cut out the failed section or replace the whole slab, re-prep the base, and pour new concrete with proper rebar and control joints. If the crack is cosmetic, we can grind and patch instead. We tell you which option makes sense.
Water pooling against the house
We re-grade the base to a minimum 1/8-inch-per-foot slope away from the structure, and we add a channel drain or swale where the yard is too tight to shed water on its own. The new slab drains where it should.
Sinking or uneven patio surface
We remove the slab, excavate to stable soil, and rebuild the base with compacted aggregate before pouring. If the subsoil is expansive clay, we over-excavate and bring in engineered fill. That is the fix that lasts.
Efflorescence and salt-air damage
We pour with air-entrained mix and seal with a penetrating sealer rated for marine environments. On existing slabs, we clean the efflorescence, let the concrete dry, and seal it. Re-seal every 3 to 5 years and it stays clean.
Pricing process
What Concrete Patio Installation Costs
$3,600 - $13,200 depending on size, finish, and site conditions
Patio size
Concrete is priced per square foot, but the per-foot price drops as the patio gets bigger because mobilization and setup are fixed costs. A 200-square-foot patio costs more per foot than a 600-square-foot patio.
Finish type
A broom finish is the base price. Exposed aggregate adds $2 to $4 per square foot. Stamped concrete adds $4 to $8 per square foot because of the labor and the stamping tools. Integral color adds less than stamping.
Demolition and haul-away
If we are removing an old slab, that adds $2 to $4 per square foot for breaking, loading, and dump fees. Concrete is heavy, and disposal is not free. We quote it as a line item so you see it.
Customer reviews
What La Jolla Homeowners Say
★★★★★
“We had a 400-square-foot patio poured behind the house, and the crew handled the slope perfectly. No standing water after the January storms, which was the whole reason we replaced the old slab. They cut the control joints at 24 hours like they said they would, and the finish is even. Fixed price, no surprises.”
★★★★★
“Our old patio was cracked and had efflorescence all over it. La Jolla Concrete Services tore it out, re-graded the base, and poured a new slab with a broom finish. They pulled the coastal permit for us and passed inspection first time. The whole job took four days, and they cleaned up every day before leaving.”
★★★★★
“We needed a retaining wall and a patio on a steep slope. They poured the wall with proper drainage, then poured the patio on top. The rebar spacing and the expansion joint against the house were exactly what the engineer specified. Eleven years in business shows. I would use them again.”
How much does concrete patio installation cost in La Jolla California?
Most residential patios in La Jolla run $12 to $22 per square foot in 2026, so a 300-square-foot slab lands between $3,600 and $6,600. Decorative finishes, exposed aggregate, and stamped concrete push that toward the top of the range. Slopes, demolition of an old slab, and limited truck access add cost. We give you a fixed number after a site visit.
How long does it take to install a concrete patio in La Jolla?
A typical 300-square-foot patio takes 3 to 5 working days from demo to final seal. Excavation and forming take two days, the pour takes one, and curing plus joint cutting takes another two. You can walk on the slab at 48 hours and put furniture on it at 7 days. Larger patios with retaining walls run 7 to 10 days.
Do I need a permit for a concrete patio in La Jolla California?
A ground-level patio under 30 inches tall usually does not need a permit in the City of San Diego. Anything taller, anything in the coastal overlay zone, and anything tied to a retaining wall does. We check your address against the coastal zone map before we quote, and we pull the permit if one is required.
Who installs concrete patios near me in La Jolla?
We do. La Jolla Concrete Services has been pouring patios here since 2015, and we cover every neighborhood from La Jolla Shores to Mount Soledad. Call +1 (619) 984-1234 and we will schedule a site visit, usually within two business days. You get a written estimate the same day as the visit.
Related services
Related Services
Concrete Driveway Installation
If you are already pouring a patio, doing the driveway at the same time saves mobilization and often gets you a better per-square-foot price. We pour driveways to the same 4-inch minimum with rebar and control joints, sized for the slope of your La Jolla street.
Concrete Driveway Repair
Cracked, spalled, or settled driveway sections can be cut out and re-poured without replacing the whole slab. We match the existing finish and joint layout so the repair disappears. Most repairs are a one-day job and cost a fraction of a full replacement.
Concrete Patio Repair
If your existing patio has hairline cracks, a sunken corner, or efflorescence that will not scrub off, repair is often cheaper than replacement. We grind, patch, re-level, and re-seal. If the slab is beyond saving, we tell you straight and quote a new pour.Ready when you are
Get Your Concrete Patio Installation in La Jolla, California
We give you a fixed price, a written scope, and a start date before we break ground. Licensed, insured, and warrantied. Call +1 (619) 984-1234 and we will schedule your site visit, usually within two business days.
Talk with the local team
Request Concrete Patio Installation
Call us at (619) 984-1234 or email [email protected] and we will get you on the schedule. We answer the phone Monday through Friday from 8am to 6pm, and we return after-hours messages first thing the next morning. Same-day estimates are usually available if you reach us before noon. Tell us what the concrete is doing and we will tell you what it needs.